Cisco Cisco D9865 Satellite Receiver Guía De Instalación

Proceed as follows to set up the video information:

From the user interface of the D9865, choose Audio & Video > Video Setup. The Video Setup page is 
displayed.

Choose HD output video format from the HDMI/Component Format drop-down list (HD 1080i or 
HD720p). Choose Auto for the receiver to automatically detect the correct HD video format.

From the Composite Format drop-down list, choose PAL-B/G, PAL-D, or PAL-I for 625-line systems. 
Choose PAL-M for 525-line format for Brazil. Select PAL-N (AR) for 625-line format for Argentina. 
Choose NTSC or NTSC-J for 525-line systems. Select Auto for the receiver to automatically detect the 
correct SD video format.

From the Composite Aspect Ratio drop-down list, choose the intended TV system (4:3 or 16:9).

The Aspect Ratio Mode is the conversion that the receiver will perform on the incoming signal for the 
picture to be displayed correctly (for example, to correspond to the aspect ratio of your TV) on your TV, 
based on your selection.

The options are None, Auto, Auto AFD, 16:9 L/B, 4:3 P/B, 14:9, 4:3 CCO, and 16:9 SCALE. The default 
is None.

For the actual conversion performed, refer to 

From the Wide Screen Signalling drop-down list, choose the output mode, used to select how the 
receiver affects PAL WSS when it is present in the VBI. The table below describes each of the options. 
The default is Auto.