Cisco Cisco D9804 Multiple Transport Receiver Referencia técnica
Front Panel Controls and Display
4043035 Rev A
11
LED
Signal
State/Color
State/Color
Explanation
Green
Flashing indicates one of the following
conditions:
conditions:
difficulty with an input, route or output.
one or more RF inputs, or the ASI input are
not synchronized.
not synchronized.
one or more ASI outputs are routed, but
muted by a fault condition.
muted by a fault condition.
no RF signal is present or detected, or it is
muted.
muted.
Off
Off indicates all of the following conditions:
no RF input signal is available, enabled or
detected, or the input is muted.
detected, or the input is muted.
no ASI input is present.
no valid inputs are available.
Keypad Operation
Input Keypad
The input keypad includes a set of navigation buttons on the left side of the pad, and
a set of data function buttons on the right side of the pad.
a set of data function buttons on the right side of the pad.
Navigation/Selection
The navigation buttons (LEFT, RIGHT, UP and DOWN) and the SELECT button on
this keypad are the primary controllers. Each navigation button performs various
functions, depending on the current state of the menu system (i.e., sometimes the left
navigation button backspaces over an entry and sometimes moves the cursor to a
different menu item). Once the cursor is over the desired function, press the SELECT
button to choose the current item (this may go to a different menu or change an
option), and then to save the setting/selection.
this keypad are the primary controllers. Each navigation button performs various
functions, depending on the current state of the menu system (i.e., sometimes the left
navigation button backspaces over an entry and sometimes moves the cursor to a
different menu item). Once the cursor is over the desired function, press the SELECT
button to choose the current item (this may go to a different menu or change an
option), and then to save the setting/selection.