Cisco 1GHz Surge-Gap Taps, Standard & Full Profile Guía De Instalación

 

4013399 Rev C 

17 

 

KS-connector 

Tighten according to manufacturer‟s 
recommended torque specification, typically 15 
ft-lb to 25 ft-lb (20.3 Nm to 33.9 Nm), but not to 
exceed 60 ft-lb (81.3 Nm) 

Port end plug 

50 in-lb to 60 in-lb (5.6 Nm to 6.8 Nm) 

Seizure screw 

15 in-lb to 20 in-lb (1.7 Nm to 2.3 Nm) 

Faceplate bolt 

50 in-lb to 60 in-lb (5.6 Nm to 6.8 Nm) 

F-connector (drop cable) 

RG–6 or RG–59 

Tighten to manufacturer‟s recommended 
torque specification 

 
 

Installations involving a twisted-pair PDU also require tightening the PDU cover 
screw to 50 to 60 in-lb (5.6 to 6.8 Nm). 

 

The following diagrams show the proper torque sequence for closing the housing.