Cisco Cisco Content Delivery Engine 250 Guía De Instalación

 
 

6 

 

8)  It is recommended that the BMC/IPMI system be reset after the upgrade by removing  power 

from the power supplies waiting 10 seconds then replacing the power.  

 

1)  For VDS-TV, VDS-IS and VQE these files are contained in the ipmi309.zip downloaded 

from the “Download Link for IPMI FW v3.09 for VDS-TV Application” link contained 
in FN #64135: 

o Unzip ipmi309.zip to a temporary folder. 
o Copy the contents of the ipmi309/ directory to the root of the USB DOS stick. 

 

2)  Configure the dedicated Ethernet port of the CDE250 in the system BIOS, if already 

configured skip to step 3. 

a. Reboot the CDE250 system  
b. Press the <DEL> key during post to enter the BIOS setup utility 
c. Select the “IPMI Configuration” 
d. Set your IPAddress and attributes 
e. Press <ESC>, the press <CNTL><F10>, the save and exit 

 

3)  Connect an Ethernet cable to the IPMI port and to your management network 

 

4)  From a remote desktop open Superdoctor web interface: 

a. Open a web browser 
b. Enter the IPAddress that you set in step 2.1.2.d in the URL address line, This will 

start the Superdoctor web interface 

c. Login to Superdoctor, the default user name is “ADMIN” and the password is 

“ADMIN” 

d. Enter the username and password 
e. Click on the “Login” button  
f. Select the “Maintenance” tab 

 

g. Click on “Update Firmware”