Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Hoja De Datos
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 17
Data Sheet
Cisco GainMaker 1 GHz High Output 4-Port Node
with 85/102 MHz Split
with 85/102 MHz Split
Demand for consumer bandwidth continues to grow at a rapid rate every year. As a
result, cable operators with DOCSIS
result, cable operators with DOCSIS
®
-based equipment have begun introducing fiber
deeper and deeper into the network. They want to reduce service group sizes and
ultimately double, triple, or quadruple bandwidth speeds. The Cisco
ultimately double, triple, or quadruple bandwidth speeds. The Cisco
®
GainMaker
®
1
GHz High Output 4-Port Node is ideal for deep fiber applications. With higher output
levels, featuring four high-level RF output ports and a segmentable reverse path, the
Cisco GainMaker 1 GHz High Output 4-Port Node is an ideal platform for delivering
video (digital and analog) as well as high-speed data services over advanced hybrid
fiber-coaxial (HFC) networks.
levels, featuring four high-level RF output ports and a segmentable reverse path, the
Cisco GainMaker 1 GHz High Output 4-Port Node is an ideal platform for delivering
video (digital and analog) as well as high-speed data services over advanced hybrid
fiber-coaxial (HFC) networks.
The Cisco GainMaker 1 GHz High Output 4-Port Node can segment and route reverse traffic to distributed
feedback (DFB), coarse wavelength-division multiplexing (CWDM), dense wavelength-division multiplexing
(DWDM), or Enhanced Digital Reverse (EDR) transmitters. The module is available with an optional DOCSIS
status-monitoring transponder for use with all HMS-compliant monitoring and control element management
systems. It can also monitor onboard temperature, RF switch position (wink switch), and power supply condition,
as well as other features and parameters.
Installation of the Cisco GainMaker 1 GHz High Output 4-Port Node is quick and easy. The fiber receiver is
delivered with pre-connectorized fiber terminations. The optional pre-connectorized cable stub is the ideal method
for connecting the Cisco GainMaker 1 GHz Node to the fiber network. The Cisco GainMaker 1 GHz Node includes
a 4-fiber handling tray for these cables.
Figure 1. Cisco GainMaker 1 GHz High Output 4-Port Node with 85/105 MHz Split