Cisco GainMaker Optoelectronic Node 1GHz with 65 86 MHz Split Hoja De Datos
GainMaker Node – 5-40/52-1002 MHz with RF Redundancy
9
Ordering Information
The GainMaker Node is available in a wide variety of configurations. The GainMaker Ordering Matrix provides
ordering information for configured node stations, existing amp to node upgrade kits, and launch amplifiers. This
page contains ordering information for required and optional accessories. Please consult with your Account
Representative, Customer Service Representative, or Applications Engineer to determine the best configuration
for your particular application.
Required Accessories for RF Module
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20 dB
•
1 required for AGC, if applicable*
•
4 required for reverse (3 input, 1 output)
*To determine AGC pad value, subtract 34dB from the design value main port RF output
level at the AGC pilot frequency.
level at the AGC pilot frequency.
589693 (0 dB)
sequentially thru
589734 (20.5dB)
Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
•
•
1 required for RF redundant module
4007228 (0 dB)
sequentially thru
4007248 (30 dB)
Plug-in Reverse Equalizer – Available in 1 dB steps from 0 to 12 dB at 40 MHz
•
1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and 589628
(1 dB) sequentially thru
589639 (12 dB)
Plug-in Forward Equalizer for RF redundant module - Available in 1 dB steps from 0 to 12
dB at 40 MHz
dB at 40 MHz
•
1 required for RF redundant module (unless design value is 0 dB which is provided)
4009826 (0 dB)
and 545107 (1 dB)
sequentially thru
545118 (12 dB)
Required Accessories for Optical Components
Part Number
279500 (0 dB)sequentially thru
279513 (13 dB) in 1 dB steps
504151 (14 dB) sequentially
thru 504157 (20 dB) in 1 dB
steps
279513 (13 dB) in 1 dB steps
504151 (14 dB) sequentially
thru 504157 (20 dB) in 1 dB
steps
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20.5 dB
•
•
1 ea required for Transmitter and Receiver(s).
•
1 ea required for RF Redundant Mode – redundant forward path
•
1 ea required for Optical Interface Board – redundant reverse path
565231 (0.5 dB) sequentially
thru 565251 (20.5 dB) in 1 dB
steps
thru 565251 (20.5 dB) in 1 dB
steps