Cisco GainMaker Opto Node 1GHz with 40 52 MHz Split and RF Redundancy Guía De Instalación
[Type text]
Changing a GainMaker Amplifier to a GainMaker Node
Installation Instructions
Overview
Audience
These installation instructions are intended for all cable system operators or
installers who want to upgrade their existing GainMaker™ System Amplifier to a
GainMaker Node.
Introduction
An existing GainMaker System Amplifier can be upgraded to a GainMaker Node by
installing a GainMaker Node upgrade kit. Refer to the GainMaker Ordering Matrix
for part numbers.
Tools Required
Before you start, make sure you have the following tools.
•
•
Torque wrench with 1/2 –inch socket
•
Screwdriver appropriate for the type of screws on the amplifier module cover
– T-15 Torx bit screwdriver
– Phillips-head screwdriver
– T-15 Torx bit screwdriver
– Phillips-head screwdriver