Cisco GainMaker Reverse Segmentable Node - 1GHz with 40 52 MHz Split Guía Para Resolver Problemas
GS7000, GainMaker, and 694X Node
Transmitter RF Shutdown Technical
Bulletin
Transmitter RF Shutdown Technical
Bulletin
Overview
Introduction
The optical transmitters of the GS7000, GainMaker, and 694X Nodes with specific
date codes may have a defective capacitor which results in RF shutdown.
date codes may have a defective capacitor which results in RF shutdown.
Purpose
This document details the issue and explains how to get the issue resolved.
Audience
This technical bulletin applies to all system engineers and managers who are
responsible for operating or maintaining Optical Node equipment.
responsible for operating or maintaining Optical Node equipment.
Qualified Personnel
Only appropriately qualified and skilled service personnel should attempt to
install, operate, maintain, and service this product.
install, operate, maintain, and service this product.
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.
service this product. Otherwise, personal injury or equipment damage may
occur.
Safe Operation for Software Controlling Optical Transmission
Equipment
Equipment
If this document discusses software, the software described is used to monitor
and/or control ours and other vendors' electrical and optical equipment designed
to transmit video, voice, or data signals. Certain safety precautions should be
observed when operating equipment of this nature.
and/or control ours and other vendors' electrical and optical equipment designed
to transmit video, voice, or data signals. Certain safety precautions should be
observed when operating equipment of this nature.
For equipment specific safety requirements, refer to the appropriate section of the
equipment documentation.
equipment documentation.