Cisco Headend System Release 2.5 Guía De Instalación
1-6
SR 2.5 and SR 3.5 UniPack Pre-Upgrade Procedures
78-738190-01 Rev B
Back Up the Database,
Continued
5. Label your backup tape with the following information:
DNCS Database Backup [Day of the Week]
[Site Name]
[Software Version]
DBDS Maintenance CD 2.1.x
[Tape #]
Notes:
•
Notes:
•
Customize the label with the day of the week, site name, and software
version for the site you are backing up.
•
If your database backup requires more than one tape, be sure to note the
tape number on the label.
6. Insert the tape into the tape drive of the DNCS and wait until the green light
stops flashing.
Important: Be sure that you are using different tapes for each day of the
Important: Be sure that you are using different tapes for each day of the
week, as recommended in the Introduction to this chapter.
7. Type . /dvs/dncs/bin/dncsSetup and then press Enter.
Important: Be sure to type the dot, followed by a space, prior to typing /dvs.
Result: The system establishes the root user environment.
Result: The system establishes the root user environment.
8. Choose one of the following options.
•
If you are using the standard tape drive configuration, follow these
instructions.
a) Type /cdrom/cdrom0/s3/backup_restore/backupDatabase and then
a) Type /cdrom/cdrom0/s3/backup_restore/backupDatabase and then
press Enter.
Result: The system displays the following message:
Result: The system displays the following message:
Please mount tape 1 on /dev/rmt/0h and then press Return to
continue.
b) Go to step 10.
•
If you are using a custom tape drive configuration, go to step 9.