Cisco Headend System Release 2.5 Guía De Instalación
78-738190-01 Rev B
SR 2.5/3.5 Direct ASI Installation and Configuration Procedures
I-31
Restart the BFS and OSM Processes
Restarting the BFS and OSM Processes
You are now ready to restart the BFS and OSM processes, which you stopped earlier
in this appendix. Follow these instructions to restart the BFS and OSM processes.
Note: When you restart the BFS processes, the system rebuilds the PAT
Note: When you restart the BFS processes, the system rebuilds the PAT
Configuration table. It may take up to 10 minutes for the PAT Configuration table to
be rebuilt.
1.
If necessary, open an xterm window on the DNCS.
2.
Type dncsControl and then press Enter.
Result: The Dncs Control window opens.
Result: The Dncs Control window opens.
3.
Type 2 (for Startup / Shutdown Single Element Group) and then press
Enter.
Result: The Dncs Control window updates to show all the servers and
Result: The Dncs Control window updates to show all the servers and
processes on the DNCS.
4.
Type the number associated with BFS Server and then press Enter.
Result: The Dncs Control window updates to display a message
Result: The Dncs Control window updates to display a message
prompting you to enter the target status for the entire element group or to
type E to display the individual elements of the group.
5.
Type 2 (for running) and then press Enter.
Result: A confirmation message appears.
Result: A confirmation message appears.
6.
Type y (for yes) and then press Enter.
Result: After a few moments, the Dncs Control window updates to
Result: After a few moments, the Dncs Control window updates to
display the current state (Curr Stt) of the selected group.
7.
Wait until the current state of the BFS Server group is Running.
Note: The Dncs Control window updates automatically every few
Note: The Dncs Control window updates automatically every few
seconds or you can press Enter to force an update.