Cisco Headend Digital Broadband Delivery System
Chapter 8 Customize Buttons for Services
92
78-745238-01 Rev D
Define Position and Width of Buttons
This section describes how to define the position and width of buttons for the
services in your Services Portal. You can use the appropriate form in this section to
record your custom values.
Use the following worksheets to complete your customization of the buttons:
Use the following worksheets to complete your customization of the buttons:
For toolbar mode: Button Position and Widths for Toolbar Mode (on page 5)
For full screen mode: Button Position and Widths for Full Screen Mode (on page
Defining Position and Width of Buttons
1 From the SP Service Guide, click the Display Frame tab, if it is not already
selected.
2 Enter the new Left and Top coordinates if you want to reposition buttons.
3 Enter new button Widths if you want to change the width of the buttons.
4 On the File menu, click Save.
5 View your Services Portal to see if any of your settings require adjustments.
6 Repeat this entire procedure until the positions and widths that you want are
3 Enter new button Widths if you want to change the width of the buttons.
4 On the File menu, click Save.
5 View your Services Portal to see if any of your settings require adjustments.
6 Repeat this entire procedure until the positions and widths that you want are
achieved. If you want to start over, you can click Reset to Default to return to the
original button settings.
Important! Clicking Reset to Default resets all of the values in the Display
Important! Clicking Reset to Default resets all of the values in the Display
Frame tab. Therefore, before you click Reset to Default, record any customized
settings that you want to keep using the appropriate form on the following
pages. The form you use depends on the launch mode you have selected.