Cisco Headend System Release 2.5
Chapter 2 Install the Services Portal
38
78-745238-01 Rev D
Install Additional Set-Top Support for Services
Portal
Follow the instructions in this section to set up support for additional set-tops (Pace
and/or RNG/Linux set-tops), which requires the following steps:
1 Create new directories in the /dvs/appFiles/ServicesPortal directory.
2 Copy the SARA ptv file to the correct directory.
3 Acquire and copy the additional ptv files to the correct directories.
1 Create new directories in the /dvs/appFiles/ServicesPortal directory.
2 Copy the SARA ptv file to the correct directory.
3 Acquire and copy the additional ptv files to the correct directories.
For Pace set-tops, see Install Pace Set-Top Support (on page 40)
For RNG/Linux set-tops, see Install RNG/Linux Set-Top Support (on page
4 Set up the BFS client for the new ptv files.
5 Set up the SAM service for the new ptv files.
This section contains procedures for each of these steps.
5 Set up the SAM service for the new ptv files.
This section contains procedures for each of these steps.
Creating New Directories for the ptv Files
1 Open an xterm window on the Application Server.
2 Type the following command and press Enter to make the Services Portal
2 Type the following command and press Enter to make the Services Portal
directory active.
cd /dvs/appFiles/ServicesPortal
cd /dvs/appFiles/ServicesPortal
3 Create the directory cpu1 by typing the following command and pressing Enter.
mkdir cpu1
4 Create the directory cpu2 by typing the following command and pressing Enter.
mkdir cpu2
5 Create the directory cpu3 by typing the following command and pressing Enter.
mkdir cpu3
6 Go to
Copying the SARA ptv File to the Correct Directory (on page 39).