Cisco Headend System Release 2.7 Guía Del Usuario
Remove an Application from the Source List
4001182 Rev B
41
Remove an Application from the Source List
Overview
This section describes the procedures for removing the application from the source
list on the DNCS.
list on the DNCS.
Removing an Application From the Source List
1 From the DNCS Administrative Console, click the DNCS tab, and then click the
System Provisioning tab.
2 Click Source to open the Source List window.
3 Select the source for this application.
4 Click File and select Source Definitions. The Source Definitions List opens.
3 Select the source for this application.
4 Click File and select Source Definitions. The Source Definitions List opens.
5 Are there any source definitions associated with this source?
If yes, go to step 6.
If no, go to step 11.
6 Select a session, click File and select Delete. A confirmation window appears.
7 Click Yes to confirm the deletion.
8 Did you delete an SA digital source?
7 Click Yes to confirm the deletion.
8 Did you delete an SA digital source?
If yes, a message appears and asks you if you want to tear down the session
associated with this source. Click Yes and go to step 9.
associated with this source. Click Yes and go to step 9.
If no and are you are deleting a non-SA source, a message appears informing
you that SI Manager must be restarted. Click OK and go to step 9.
Note: For help with restarting SI Manager, refer to the Digital Network Control
System Online Help.
you that SI Manager must be restarted. Click OK and go to step 9.
Note: For help with restarting SI Manager, refer to the Digital Network Control
System Online Help.
9 Do you need to delete another source definition?
If yes, repeat steps 6 through 8.
If no, go to step 10.
10 From the Source Definition List window, click File and select Close.