Cisco Headend System Release 2.5 Notas de publicación
Stop the System Components
4004148 Rev C
103
Stop the System Components
Introduction
Use the procedures in this section to stop Spectrum, the Application Server, and the
DNCS.
DNCS.
Stopping Spectrum
1 From the DNCS Administrative Console Status window, click Control in the
NMS section of the window. The Select Host to run on window appears.
2 Select the appropriate Host Machine and then click OK. The Spectrum Control
Panel appears.
3 Click Stop SpectroSERVER. A confirmation message appears.
4 Click OK at the confirmation message. The Status message on the Spectrum
4 Click OK at the confirmation message. The Status message on the Spectrum
Control Panel shows Inactive.
5 Click Exit on the Spectrum Control Panel. A confirmation message appears.
6 Click OK at the confirmation message. The Spectrum Control Panel closes.
6 Click OK at the confirmation message. The Spectrum Control Panel closes.
Stopping the Application Server
Choose one of the following procedures based upon the resident application that
runs on your system:
runs on your system:
For sites that support the Cisco Resident Application, follow the instructions in
Stopping the Application Server at SARA Sites.
Stopping the Application Server at SARA Sites.
For sites that support the Aptiv resident application, follow the instructions in
Stopping the Application Server at Aptiv Sites.
Stopping the Application Server at Aptiv Sites.