Cisco Headend System Release 2.5 Notas de publicación
Restart the BFS, OSM, and siManager Processes
4004148 Rev C
153
Restart the BFS, OSM, and siManager Processes
Restarting the BFS, OSM, and siManager Processes
Follow these instructions to restart the BFS, OSM, and siManager processes.
1 From the DNCS Control window, click to highlight the bfsRemote process.
2 Click Process and then select Start Process. In a few minutes, the indicator for
1 From the DNCS Control window, click to highlight the bfsRemote process.
2 Click Process and then select Start Process. In a few minutes, the indicator for
the bfsRemote process changes from red to green.
Important! Do not go to step 3 until the indicator has changed to green.
Important! Do not go to step 3 until the indicator has changed to green.
3 From the DNCS Control window, click to highlight the bfsServer process.
4 Click Process and then select Start Process. In a few minutes, the indicator for
4 Click Process and then select Start Process. In a few minutes, the indicator for
the bfsServer process changes from red to yellow.
Note: The bfsServer process will not show green because the BFS QAM is
currently stopped.
Important! Do not go to step 5 until the indicator has changed to yellow.
Note: The bfsServer process will not show green because the BFS QAM is
currently stopped.
Important! Do not go to step 5 until the indicator has changed to yellow.
5 From the DNCS Control window, click to highlight the osm process.
6 Click Process and then select Start Process. In a few minutes, the indicator for
6 Click Process and then select Start Process. In a few minutes, the indicator for
the osm process changes from red to green.
Important! Do not go to step 7 until the indicator has changed to green.
Important! Do not go to step 7 until the indicator has changed to green.
7 From the DNCS Control window, click to highlight the siManager process.
8 Click Process and then select Start Process. In a few minutes, the indicator for
8 Click Process and then select Start Process. In a few minutes, the indicator for
the siManager process changes from red to green.
Important! Do not go to the next procedure until the indicator has changed to
green.
Important! Do not go to the next procedure until the indicator has changed to
green.