Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guía De Instalación
Enhanced Digital Return (EDR) System Installation
OL-29643-02
215
To Install the EDR Transmitter
Follow these steps to install the transmitter module(s).
1 See Module Replacement Procedure (on page 141) for instructions on installing
1 See Module Replacement Procedure (on page 141) for instructions on installing
these modules in the housing.
2 Remove any existing transmitter modules from the positions in which you want
to install the EDR transmitter module(s).
3 Install one to four 1:1 transmitter modules in the housing lid as required for your
application.
IF you are installing...
THEN...
only one transmitter
module
module
install the module in transmitter positions XMTR 1
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
Two or three
transmitter modules
transmitter modules
install the modules in transmitter positions XMTR
1/XMTR 2, or XMTR 1/XMTR 2/XMTR 3
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
1/XMTR 2, or XMTR 1/XMTR 2/XMTR 3
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
four transmitter
modules
modules
install the modules in transmitter positions XMTR
1/XMTR 2/ XMTR 3/XMTR 4
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
1/XMTR 2/ XMTR 3/XMTR 4
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
4 Install one or two 2:1 transmitter modules in the housing lid as required for your
application.
IF you are installing...
THEN...
only one transmitter
module
module
install the module in transmitter positions XMTR
1/XMTR 2
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.
1/XMTR 2
AND
install an appropriate Reverse Configuration Module in
the RF amplifier assembly.
Refer to the RCM Section on page 40 for details.