Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guía De Instalación
Chapter 2 Installation
18
4037424 Rev A
GS7000 Optical Hub Installation
Complete the following steps to install the transponder in the GS7000 Optical Hub.
1 Remove the transponder from the shipping package.
2 Ensure that the correct pad for the desired application is installed in the pad
1 Remove the transponder from the shipping package.
2 Ensure that the correct pad for the desired application is installed in the pad
socket. For GS7000 Optical Hub applications, verify the use of the 10 dB pad in
the transponder pad socket, as shown below.
the transponder pad socket, as shown below.
3 If any other size pad is in place (a 0 dB pad, for example), replace it with the 10
dB pad as shown.