Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guía De Instalación
Chapter 5 Using the Web Interface
56
4037424 Rev A
HSIA Diagnostics Page: Ping Command
Select the HSIA tab to view high speed Internet access diagnostics. The HSIA
Diagnostics page appears as shown in the following example.
Diagnostics page appears as shown in the following example.
The HSIA-Ping Web Interface is accessed from the Connection form that is first
displayed when the transponder is accessed.
displayed when the transponder is accessed.
Input Parameters
Input Parameters
Description
Target IP address or name Either a standard IPv4 dotted-quad address or a host name
is entered. The address entered will be unconditionally
given to the DNS resolver; a dotted-quad will be resolved
the same value, and a name will be resolved to its IPv4
address. The final IPv4 address to be pinged is shown in
parenthesis beside the host field.
given to the DNS resolver; a dotted-quad will be resolved
the same value, and a name will be resolved to its IPv4
address. The final IPv4 address to be pinged is shown in
parenthesis beside the host field.
Ping from what source
There are up to three choices, depending on what is
available in the unit:
available in the unit:
Cable Modem: always available
CPE: available if the CPE stack is activated
EMTA: available if the VoIP stack is licensed and
activated
activated
Number of Pings
Range is 1 to 100.
Ping size
Range is 64 to 1518. 64 is the standard size.