Cisco Headend System Release 3.2 Guía De Instalación
Appendix D
Update the DHCT OUI with the updateOUI Utility
222
4020695 Rev C
Reset the OUI
System operators should run the updateOUI utility with the -r option to reset the
OUI of DHCTs in the database. The updateOUI utility, when used with the -r option,
changes the 00:02:DE identifier back to 00:01:A6 or 00:40:7B, whichever is
appropriate. System operators are required to run the updateOUI utility with the -r
option whenever they roll back from an upgrade to PowerTV OS 3.x.
OUI of DHCTs in the database. The updateOUI utility, when used with the -r option,
changes the 00:02:DE identifier back to 00:01:A6 or 00:40:7B, whichever is
appropriate. System operators are required to run the updateOUI utility with the -r
option whenever they roll back from an upgrade to PowerTV OS 3.x.
Important: It is very rare for system operators to have a need to use the -r option. Be
sure you understand the implications of using the -r option before proceeding. Call
Cisco Services if you have any questions.
sure you understand the implications of using the -r option before proceeding. Call
Cisco Services if you have any questions.
Notes:
The -z option, when used with the -r option, resets a null OUI back to the first
three octets of the DHCT MAC address.
three octets of the DHCT MAC address.
You may sometimes hear these procedures referred to as running the updateOUI
utility in the reverse direction.
utility in the reverse direction.
Refer to one of the following procedures in this section when resetting the OUI:
To reset the OUI for all DHCTs in the database, refer to Resetting the OUI for all
DHCTs (on page 225).
DHCTs (on page 225).
To reset the OUI for a specific model number of DHCT, refer to Resetting the
OUI by DHCT Model Number (on page 224).
OUI by DHCT Model Number (on page 224).
To reset the OUI for a specific model and revision number of DHCT, refer to
Resetting the OUI by DHCT Model Number and Revision Number (on page 225).
Resetting the OUI by DHCT Model Number and Revision Number (on page 225).
To reset the OUI for a specific DHCT, refer to Resetting the OUI by DHCT MAC
Address (on page 226).
Address (on page 226).
To reset the OUI for DHCTs with a null OUI, refer to Reset the Null OUI (on
page 226).
page 226).