Cisco Headend Digital Broadband Delivery System Guía De Instalación
Chapter 7 Provision DTACS
102
78-4036705-01 Rev D
Note: You can only edit one row of data at a time.
2 Press the Tab key to go to the field you want to update. The following table
describes the fields that can be updated on this page.
Field Name
Definition
Stream Type
Type of IP Stream. Valid values are AMM or SI.
Destination IP
Address
Address
The IP Address associated with this stream type
Destination IP Port
The network port associated with the stream type
Data Rate
The rate at which data can be transmitted when using this
type of stream
type of stream
Packet ID
The pre-defined packet identifier associated with this type of
data
data
Bcast Service Group
Name
Name
The name of the BSG associated with this stream.
3 Click Save to save your changes, or click Cancel if you want to leave this screen
without saving changes.
Delete an IP Stream
1 Click the check box next to the Stream Type you want you want to delete on the
IP Streams List page. A check mark appears in the check box.
2 Click Delete. The IP Streams List page appears and the IP Stream you selected is
not listed in the streams list.
Note: If you want to delete all IP Streams, click the check box in the first row of
the stream list and then click Delete.
Note: If you want to delete all IP Streams, click the check box in the first row of
the stream list and then click Delete.