Cisco Headend Digital Broadband Delivery System Guía De Instalación
Configure the ASI Server Hosts Table
78-4004034-01 Rev C
99
Configure the ASI Server Hosts Table
Introduction
Make sure all host names and IP addresses listed in the following tables are entered
in the ASI server hosts table (/etc/hosts). Make sure that you use the correct table
for your system environment.
Note: Your system administrator should have IP addresses assigned for each host.
Important: The tables on the following pages contain host entries that must be
Note: Your system administrator should have IP addresses assigned for each host.
Important: The tables on the following pages contain host entries that must be
present in the ASI server hosts table. However, a particular vendor may use multiple
host names for the same IP address. Therefore, it may be necessary to list multiple
variations of the host names provided in the following table (for example,
nameserver and bmsnameserver).
Also, you may have additional host entries that are specific to your video server.
Also, you may have additional host entries that are specific to your video server.
Check with your video server vendor to make sure that you have all required host
entries.
When you are finished using the tables to enter information in the ASI server hosts
When you are finished using the tables to enter information in the ASI server hosts
table, the next step you take depends on your server environment:
If you have an ISA environment, go to ISA Environments: Register Host Entries
With BMS (on page 101).
If you use a Seachange server, go to Seachange Environments: Edit the ISA.props
File (on page 104).
Host Table Entries for an ISA System
The following table contains host entries that must be present in the ASI server hosts
table for the ISA implementation of xOD. Use the IP Address column to record the
IP addresses for each host per your system administrator or vendor.
Important: The twisahost and sessiongateway hosts must be on the same machine,
Important: The twisahost and sessiongateway hosts must be on the same machine,
but may have different IP addresses. The ISA BMS server may have multiple
network interfaces. The twisahost needs to be able to communicate with the DHCTs,
and the session gateway must be able to communicate with the ASI server.