Cisco Headend System Release 2.7 Guía De Instalación
Chapter 4 Maintenance Window Activities
54
4042225 Rev A
Continue with the V245/V240 Standalone
Application Server Upgrade
Important: Complete this procedure only if you are continuing to use a standalone
Application Server. If you are migrating to an integrated Application Server, skip
this procedure.
1 From the root xterm window on the Application Server, type the following
Application Server. If you are migrating to an integrated Application Server, skip
this procedure.
1 From the root xterm window on the Application Server, type the following
command and press Enter. The Do you want to continue with the upgrade?
message appears.
message appears.
/var/tmp/lu_continue
2 Type y and press Enter. The Are you certain you want to proceed? message
appears.
3 Type y and press Enter.
Important: Do not type init 6 to reboot the Application Server.
Results:
Results:
A live upgrade operation is executed upon startup of the boot environment.
The target boot environment is activated.
4 Type the following command and press Enter to verify that the new boot
environment is set to Active On Reboot.
lustatus
Result: The system displays output similar to the following: