Cisco Headend System Release 2.7 Guía De Instalación
Inspect the dncsSetup File for the atm_addr Environment Variable
4036631 Rev B
95
Inspect the dncsSetup File for the atm_addr
Environment Variable
After an upgrade, the dncsSetup file must contain the following entry:
atm_addr=dncsatm. If the atm_addr=dncseth entry exists in the dncsSetup file after
an upgrade, you must edit it so that it becomes atm_addr=dncsatm.
atm_addr=dncsatm. If the atm_addr=dncseth entry exists in the dncsSetup file after
an upgrade, you must edit it so that it becomes atm_addr=dncsatm.
Inspecting the dncsSetup File
Follow these instructions to inspect the dncsSetup on the DNCS for the presence of
the atm_addr variable, and to add the variable, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/bin and then press Enter. The /dvs/dncs/bin directory
the atm_addr variable, and to add the variable, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/bin and then press Enter. The /dvs/dncs/bin directory
becomes the working directory.
3 Type more dncsSetup and then press Enter. The dncsSetup opens for viewing
using the UNIX more utility.
4 Examine the dncsSetup file and look for the following entry:
atm_addr=dncsatm
5 Does the dncsSetup file contain the entry as described in step 4?
If yes, follow these instructions.
a Press the Ctrl and c keys simultaneously to exit the more utility.
a Press the Ctrl and c keys simultaneously to exit the more utility.
b Go to the next procedure in this chapter.
If no, follow these instructions.
a Press the Ctrl and c keys simultaneously to exit the more utility.
a Press the Ctrl and c keys simultaneously to exit the more utility.
b If necessary, open an xterm window on the DNCS.
c Type su - dncs and then press Enter. The password prompt appears.
d Type the dncs password and then press Enter.
e Type vi dncsSetup and then press Enter. The dncsSetup file opens using
the UNIX vi text editor.
f Edit the dncsSetup file so that it contains an atm_addr=dncsatm entry.
Note: The file may contain an atm_addr=dncseth entry. If so, change it so
that it reads atm_addr=dncsatm. You must not have an
atm_addr=dncseth entry in the dncsSetup file after the upgrade to SR 2.1
or later.
that it reads atm_addr=dncsatm. You must not have an
atm_addr=dncseth entry in the dncsSetup file after the upgrade to SR 2.1
or later.
g Save and close the dncsSetup file.
h Type exit and then press Enter to log out of the dncs role.
i Go to the next procedure in this chapter.