Cisco Headend System Release 2.7 Guía De Instalación
Chapter 1 Initial Installation of RNCS Software
24
4012763 Rev B
Add and Configure the RNCS
Configuring the RNCS on the DNCS
Now that you have added the RNCS to the DNCS, complete the following steps to
configure the RNCS.
1 From the DNCS Administrative Console, click the Element Provisioning tab.
2 Click Headend. The Headend Summary window opens.
3 Click Add Headend. The Headend Summary window opens with a new, blank
1 From the DNCS Administrative Console, click the Element Provisioning tab.
2 Click Headend. The Headend Summary window opens.
3 Click Add Headend. The Headend Summary window opens with a new, blank
row.
4 Enter the following information:
Headend Name
Headend ID
Site Name
5 Click Save. A confirmation message appears.
6 Click OK on the confirmation message.
7 Click Exit.
6 Click OK on the confirmation message.
7 Click Exit.
Adding the RNCS Site
Complete the following steps to add the RNCS to the DNCS configuration.
1 On the DNCS, open, if necessary, the DNCS Administrative Console.
2 Select the System Provisioning tab.
3 Click RNCS Sites. The Site Summary window opens.
4 Click Add Site. The Site Summary window updates to reveal a new, empty row.
5 Enter the following information:
1 On the DNCS, open, if necessary, the DNCS Administrative Console.
2 Select the System Provisioning tab.
3 Click RNCS Sites. The Site Summary window opens.
4 Click Add Site. The Site Summary window updates to reveal a new, empty row.
5 Enter the following information:
Site Name
Site ID
Site IP Address
Site MAC Address
BFS MAC Address
6 Click Save. A Confirmation message appears.
7 Click OK.
8 Click Exit.
7 Click OK.
8 Click Exit.