Cisco Headend System Release 2.7 Guía De Instalación
Roll Back the RNCS Software
4012763 Rev B
51
Attaching Mirrors
After rolling back the RNCS software, complete the following steps to attach the
server’s mirrors.
Important: After attaching the server’s mirrors, you are committed to the rollback.
1 Type cd /cdrom/cdrom0/s0/sai/scripts and then press Enter. The
Important: After attaching the server’s mirrors, you are committed to the rollback.
1 Type cd /cdrom/cdrom0/s0/sai/scripts and then press Enter. The
/cdrom/cdrom0/s0/sai/scripts directory becomes the working directory.
2 Type ./V240_attach_mirrors and then press Enter. A confirmation message
appears.
3 Type y (for yes) and then press Enter. The system runs a script that enables the
disk-mirroring function of the Sun Fire V240 server.
4 When the mirrors have been enabled, type exit and then press Enter. The root
user logs out of the Sun Fire V240 server.
5 Type metastat and then press Enter to verify that submirrors d4xx and d7xx are
in an ok state.