Cisco Headend Digital Broadband Delivery System Guía Del Usuario
Chapter 8 Change DHCT Status to Out-of-Service with the 2way2oos Utility
68
4020694 Rev B
Stop and Restart the HCT Manager Process
You need to stop and restart the HCT Manager process on the DNCS in order to
reclaim the IP addresses associated with the DHCTs in your text file. The
instructions in this section guide you through the steps of stopping and restarting
the HCT Manager process.
reclaim the IP addresses associated with the DHCTs in your text file. The
instructions in this section guide you through the steps of stopping and restarting
the HCT Manager process.
Note: Stopping and then restarting a process is often referred to as "bouncing" the
process.
process.
Stopping the HCT Manager Process
Follow these instructions to stop the HCT Manager process on the DNCS.
1 If necessary, open an xterm window on the DNCS.
2 Type dncsControl and then press Enter. The Dncs Control window opens.
1 If necessary, open an xterm window on the DNCS.
2 Type dncsControl and then press Enter. The Dncs Control window opens.