Cisco Headend Digital Broadband Delivery System Guía Del Usuario
4002178 Rev C
Look, Feel, and Navigation Options
8-5
Use the Numeric Keys on the Remote Control for the
General Settings Menu
Introduction
The Numeric Key Chooses Channel option allows the subscriber to use the numeric
keys on the remote control to set values on the General Settings menu. If this feature
is disabled, the numeric keys are disabled on the General Settings menu. The
subscriber must press the UP or DOWN Arrow key or the PAGE + and PAGE – key
to set values on the General Settings menu.
Important: If you enable this feature, we recommend that you also enable the
Important: If you enable this feature, we recommend that you also enable the
Numeric Key Sets Time option.
Recommended Setting
Enable this option to allow subscribers to use the numeric keys to set values on the
General Settings menu.
Using the Numeric Keys on the Remote Control for the General Settings Menu
To use the numeric keys on the remote control to set values on the General Settings
menu, complete the following steps.
1.
On the DNCS Administrative Console, select the Server Applications tab.
2.
Click DHCT Config.
Result: The DHCT Configure Prompt window opens.
Result: The DHCT Configure Prompt window opens.
3.
Select Global.
Result: The Set Up Global DHCT Configuration window opens.
Result: The Set Up Global DHCT Configuration window opens.
4.
Select the General Settings tab.
Result: The General Settings tab appears in the forefront.
Result: The General Settings tab appears in the forefront.
5.
Do you want your subscribers to use the numeric keys on the remote control
to set values on the General Settings menu?
•
•
If yes, be sure the option for Numeric Key Chooses Channel is selected.
•
If no, be sure the option for Numeric Key Chooses Channel is not
selected. Use the UP or DOWN Arrow key or the PAGE + and PAGE –
key to set General Settings values.
6.
Click Save.
Result: The keys on the remote will respond as you specified in step 5.
Result: The keys on the remote will respond as you specified in step 5.
7.
Click Cancel.
Result: The DHCT Configure prompt opens.
Result: The DHCT Configure prompt opens.
8.
Click File and Close to close the DHCT Configure prompt.