Cisco Headend Digital Broadband Delivery System Guía De Instalación
Chapter 3 SR 2.7/3.7/4.2 SP4 Installation Procedures
60
4042389 Rev A
Disable the SAM Process on Rovi and MDN/ODN Systems
If the site you are upgrading uses the Aptiv or MDN/ODN application server, you
need to disable the SAM process before you restart the system components.
Complete the following steps to disable the SAM process.
need to disable the SAM process before you restart the system components.
Complete the following steps to disable the SAM process.
Notes:
If the site you are upgrading does not use the Aptiv or MDN/ODN application
server, skip this procedure and go to Restart the System Components (on page
59).
server, skip this procedure and go to Restart the System Components (on page
59).
You should be logged on to the DNCS as dncs user.
Prerequisites
Before disabling the SAM process, make sure that the following have been
completed:
completed:
You should be logged on to the DNCS as dncs user.
The SaManager process is stopped and not running.
Disable the SAM Process on Aptive Systems
1 In the DNCS section of the DNCS Administrative Console Status window, click
1 In the DNCS section of the DNCS Administrative Console Status window, click
Control. The DNCS Monitor window opens.
2 From an xterm window on the DNCS, type dncsControl and then press Enter.
The DNCS Control window opens.
3 Type 4 (for Define/Update Grouped Elements) and then press Enter. The
window updates to list a series of element groups.
4 Type 14 (for saManager) and then press Enter. The window updates to list the
elements in the group.
5 Type 1 (for /dvs/dncs/bin/saManager) and then press Enter. The first in a
series of confirmation messages appears.
6 Press Enter at each confirmation message to accept the default setting until a
message about cpElmtExecCtrlStatus appears. In total, you should see about six
confirmation messages.
confirmation messages.
7 At the cpElmtExecCtrlStatus message, type 2 (for Disabled) and then press Enter.
A confirmation message appears.
8 Type y (for yes) and then press Enter. The message Element Definition was
Modified appears.
9 Follow the on-screen instructions to exit from the DNCS Control window.
If the site you are upgrading uses the Aptiv or MDN/ODN application server, you
need to disable the SAM process before you restart the system components.
Complete the following steps to disable the SAM process.
need to disable the SAM process before you restart the system components.
Complete the following steps to disable the SAM process.