Cisco Headend Digital Broadband Delivery System Guía Del Usuario
Expanding the Number of Available Service Groups
4022446 Rev B
13
Expanding the Number of Available Service
Groups
Groups
Important: This section pertains to sites that are running SR 4.2 SP2 or later.
To expand the number of available service groups, you must manually build the
additional BFS carousels. Complete the following procedure for each available
service group in the exact order shown.
additional BFS carousels. Complete the following procedure for each available
service group in the exact order shown.
Important: Complete this procedure for one BFS source (for example, BFS source 26)
before enabling the next available BFS source (for example, BFS source 28).
1 To enable an additional set of 475 service groups in your system, enable the next
before enabling the next available BFS source (for example, BFS source 28).
1 To enable an additional set of 475 service groups in your system, enable the next
available BFS source (26, 28, 30, or 32) from the DNCS BFS Admin GUI
sequentially and in the exact order shown here. Then, go to step 2. For example:
sequentially and in the exact order shown here. Then, go to step 2. For example:
To expand the number of available service groups to between 476 and 950
enable BFS source 26 (SGM IB1).
enable BFS source 26 (SGM IB1).
To expand the number of available service groups to between 951 and 1,425,
enable BFS source 28 (SGM IB2).
enable BFS source 28 (SGM IB2).
To expand the number of available service groups to between 1,426 and
1,900, enable BFS source 30 (SGM IB3).
1,900, enable BFS source 30 (SGM IB3).
To expand the number of available service groups to between 1,901 and 2,375
enable BFS source 32 (SGM IB4).
enable BFS source 32 (SGM IB4).
Important: See the Digital Network Control System Online Help on your system for
additional details on configuring and enabling BFS sources.
additional details on configuring and enabling BFS sources.
2 Stop the sgManager process.
3 Using a text editor, edit the /dvs/dncs/etc/sgManager.conf file, and add a new
3 Using a text editor, edit the /dvs/dncs/etc/sgManager.conf file, and add a new
sequential 4-digit source ID to the existing list (for example ―0026‖), and then
save the file.
save the file.
4 Restart the sgManager process.
5 Do you want to enable an additional BFS source?
5 Do you want to enable an additional BFS source?
If yes, repeat this procedure from step 1.
If no, you have completed this procedure
Important: To expand the number of available service groups beyond 2,375,
contact Cisco Services for further assistance.
contact Cisco Services for further assistance.