Cisco Headend Digital Broadband Delivery System Guía Del Usuario
Install the Software
4021181 Rev B
3
Install the Software
Mount the CD
1 Insert the Report Writer Software V4.3 CD into the CD-ROM drive of the
DNCS/ISDS server.
2 Allow the File manager window to appear, which may take several minutes;
then, type df -n and press Enter. A list of the mounted file systems appears.
3 Does the output from step 2 show that the system mounted the CD?
If yes, go to Install the Software.
If no, continue with step 4.
4 Type /etc/init.d/volmgt stop and press Enter. The volume manager utility stops.
5 Did the CD user interface appear?
5 Did the CD user interface appear?
If yes, go to Install the Software.
If no, type /etc/init.d/volmgt start and press Enter. The volume manager
utility starts.
6 Repeat steps 2 through 5. Contact Cisco Services if the system still does not
recognize the CD.
Install the Software
1 From the xterm window, type su - root and press Enter to login as the root user.
2 Type cd /cdrom/cdrom0 and press Enter to access the cdrom0 directory.
3 Type /usr/sbin/install_pkg and press Enter.
2 Type cd /cdrom/cdrom0 and press Enter to access the cdrom0 directory.
3 Type /usr/sbin/install_pkg and press Enter.
Results:
The system lists the packages that will be installed.
A confirmation message appears asking you to confirm that you want to
proceed with the installation.
4 Type y and press Enter to start the installation. When the installation is complete,
the system displays a message stating that the installation was successful and a
prompt for the root user appears.
Note: The installation should take less than 30 seconds.
Note: The installation should take less than 30 seconds.
5 Was the installation successful?
If yes, go to step 6.
If no, contact Cisco Services.
6 From the xterm window where you are logged in as root, type exit and press
Enter. You are logged out as root user.