Cisco Headend Digital Broadband Delivery System Guía Del Usuario
Enable the BFS Admin Sources
4022451 Rev D
9
Enable the BFS Admin Sources
To enable the BFS Admin sources, complete the following steps:
1 Open the BFS Admin GUI.
2 Select the Sources tab.
3 Click File and New to create a new BFS Source.
4 Create a BFS Source with the recommended data shown below. If the Source
1 Open the BFS Admin GUI.
2 Select the Sources tab.
3 Click File and New to create a new BFS Source.
4 Create a BFS Source with the recommended data shown below. If the Source
IDs 9001 - 9004 are already in use, choose four unused, consecutive numbers.
DREDD1
9001
Data Rate 10000
Block Size=1024
5 Click Save to save the setting and close the GUI.
6 Repeat steps 3 to 5 to create three more BFS Sources.
6 Repeat steps 3 to 5 to create three more BFS Sources.
DREDD1
9001
Data Rate 10000
Block Size=1024
DREDD2
9002
Data Rate 40000
Block Size=1024
DREDD3
9003
Data Rate 80000
Block Size=1024
DREDD4
9004
Data Rate 120000
Block Size=1024
Important: The DataPump must be set to run (see below) in order for you to use
these sources.
these sources.