Cisco Headend Digital Broadband Delivery System Referencia técnica
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
4042948 Rev A
7
Manual Termination of the EAS Message
Manual Termination of the EAS Message
In the unlikely event that the end-of-message (EOM) instruction, transmitted at the
end of the EAS test, is not processed by your encoder/decoder or is lost in the
network, you will need to manually terminate the EAS test yourself. The following
steps guide you through this process.
1 On the DNCS Administrative Console, select the System Provisioning tab.
2 Click EAS Message.
end of the EAS test, is not processed by your encoder/decoder or is lost in the
network, you will need to manually terminate the EAS test yourself. The following
steps guide you through this process.
1 On the DNCS Administrative Console, select the System Provisioning tab.
2 Click EAS Message.
Result: The Send Emergency Alert System Message window opens.
3 Click the arrow to the right of the Event Code field and select End of Message
(EOM).