Cisco GainMaker Low Gain Dual System Amplifier 1 GHz with 55 70 MHz Split Hoja De Datos
GainMaker
®
- Line Extender - 5-55/70-1002 MHz
5
Ordering Information
The GainMaker Ordering Matrix provides ordering information for configured amplifier modules or stations. This page
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
contains ordering information for required and optional accessories that are not included as part of a configured amplifier
module or station. Consult your account representative or customer service representative for ordering assistance.
The following Required Accessories must be ordered separately (not included via GainMaker Ordering Matrix):
Required Accessories
Part Number
Plug-in Pads (attenuators) - Available in 0.5 dB steps from 0 to 20 dB
•
•
1 required for forward input
•
1 required for AGC, if applicable*
•
2 required for reverse (1 input, 1 output)
*To determine AGC pad value, subtract 29 dB from the design value station RF
output level at the AGC pilot frequency (applies to Line Extender only)
output level at the AGC pilot frequency (applies to Line Extender only)
589693 (0 dB)
sequentially thru
589734 (20.5 dB)
Plug-in Forward Equalizer - Available in 1.5 dB steps from 0 to 30 dB at 1002 MHz
•
•
1 required for forward input
4007228 (0 dB)
sequentially thru
4007248 (30 dB)
Plug-in Reverse Equalizer – Available in 1 dB steps from 0 to 12 dB at 55 MHz
•
1 required for reverse output - unless design value is 0 dB (0 dB EQ is provided)
712719 (0 dB) and
712679 (1 dB)
sequentially thru
712690 (12 dB)
The following Optional Accessories may be ordered separately:
Optional Accessories
Part Number
230 V AC Crowbar Surge Protector (plug-in, one per station)
715973
Plug-in Inverse Equalizer. Simulates cable equivalent tilts (creates tilt opposite that of equalizers). Use in place
of forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in 1.6 dB “cable
equivalent” steps from 1.6 to 16.2 dB.
of forward input EQ as needed to maintain proper output tilt in short spaced locations. Available in 1.6 dB “cable
equivalent” steps from 1.6 to 16.2 dB.
4007486 (1.6 dB)
sequentially thru
4007495 (16.2 dB)
Long Reach Test Point Adapter
562580
Status Monitoring Transponder – * see GainMaker Status Monitoring Transponder Data Sheet
*
The following Housing Options may be included with the product if ordered using the GainMaker Ordering Matrix. They may
also be ordered separately.
also be ordered separately.
GainMaker Line Extender Housing - 1 required. Housing includes housing base, lid, wiring harness, and
12/24 V power supply #593020. All Housings have 15 amp capacity.
12/24 V power supply #593020. All Housings have 15 amp capacity.
Part Number
• Uncoated
housing
without external test point access
593095
•
Chromate Plated housing without external test point access
593093
• Uncoated
housing
with external test point access
593094
•
Chromate Plated housing with external test point access
593092
GainMaker Line Extender Housing Upgrade Kit - 1 required if upgrading an existing LEI, LEII, or LE III
housing to allow use of GainMaker Line Extender modules. Includes a GainMaker Line Extender housing lid,
wiring harness, and 12/24 V power supply #593020.
housing to allow use of GainMaker Line Extender modules. Includes a GainMaker Line Extender housing lid,
wiring harness, and 12/24 V power supply #593020.
•
Uncoated housing lid without external test point access
593087
•
Painted housing lid without external test point access
593085
•
Uncoated housing lid with external test point access
593086
•
Painted housing lid with external test point access
593084
Power Pack Kit (for indoor 110 V AC powering) - Includes LE wall mount bracket, power supply with indicator
light, power supply bracket, housing base, lid, wiring harness, power cord strain relief - * see GainMaker Power
Pack Data Sheet
light, power supply bracket, housing base, lid, wiring harness, power cord strain relief - * see GainMaker Power
Pack Data Sheet
748997
Seizure Upgrade Kit - 1 required if upgrading an existing LEI or LEII housing base to allow use of GainMaker
Line Extender Modules. Includes high current (15 amp) rated seizure screws and anvils.
Line Extender Modules. Includes high current (15 amp) rated seizure screws and anvils.
548774
Scientific-Atlanta, the Scientific-Atlanta logo, and GainMaker are registered trademarks of Scientific-Atlanta, Inc.
ROSA is a trademark of Scientific-Atlanta Europe NV.
Specifications and product availability are subject to change without notice.
© 2006 Scientific-Atlanta, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
www.scientificatlanta.com
ROSA is a trademark of Scientific-Atlanta Europe NV.
Specifications and product availability are subject to change without notice.
© 2006 Scientific-Atlanta, Inc. All rights reserved.
Scientific-Atlanta, Inc.
1-800-722-2009 or 770-236-6900
www.scientificatlanta.com
Part Number 7006953 Rev A
March 2006