Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guía De Instalación
Chapter 3 USRM Web Interface
256
78-4021139-01 Rev D
SdvSm - Qam Channels Page
The SdvSm - Qam Channels page displays the list of QAM channels used by the
SdvSm application. In the local edge resource manager mode of operation, this table
is automatically configured and requires no operator action. The existence of a QAM
channel in this table causes the in-band mini-carousel generator (McmisServer) to
place a corresponding session to transport the mini-carousel.
The following illustration shows the SdvSm - Qam Channels page.
The following illustration shows the SdvSm - Qam Channels page.
Parameters
The following table explains the SdvSm - Qam Channels page parameters.
The following table explains the SdvSm - Qam Channels page parameters.
Parameter
Description
ServiceGroup.Chan
The service group and channel numbers for the entry.
Tsid
The transport stream identifier for the carrier.
ServiceGroup
The identifier for the service group. When a client
registers with the server or requests a switched program,
the client provides the service group identifier as part of
the request. The server organizes STBs by service group.
The maximum number of STBs in a service group is
configured by MAXCLIENTS. The value in the current
release is 8000.
Frequency (MHz)
The carrier center frequency.
ModFormat
The modulation format of the program.
ActiveBw (Mbps)
The bandwidth used by active programs.
FillBw (Mbps)
The active bandwidth used for filler programs. Filler
programs are dynamic programs with no known users.