Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guía De Instalación
Chapter 3 USRM Web Interface
110
78-4021139-01 Rev D
SnmpManager - Configuration Page
The SNMP Manager provides SNMP management services allowing software
components to issue SNMP Get and Set commands.
Most managed resources are implemented with device-specific software
Most managed resources are implemented with device-specific software
components. The software model for these components contains SNMP object
identifier (OID) references that allow the USRM to query the device to obtain its
configuration. Configuration information consists of frequency, TSID, modulation
format, the presence of plug-in cards for devices with plug-in line cards, and other
information. The effect is that provisioning of configuration information in the
USRM is not required. Instead, the USRM queries the device and learns the device
configuration.
A managed device can be configured to the unmanaged state. Most devices allow
A managed device can be configured to the unmanaged state. Most devices allow
the management state to be configured to unmanaged on the Snmp Config page for
the device. This state inhibits the SNMP manager and allows you to configure the
settings directly into the USRM.
The following illustration shows the SnmpManager - Configuration page.
The following illustration shows the SnmpManager - Configuration page.
Parameters
The following table explains the SnmpManager - Configuration page parameters.
The following table explains the SnmpManager - Configuration page parameters.
Parameter
Description
AdminState
Sets the current SNMP manager state.
InService - SNMP management services available.
OutOfService - SNMP management services not
InService - SNMP management services available.
OutOfService - SNMP management services not
available.
Timeout
Sets the timeout value in milliseconds.
Retries
Sets the number of retries.