Cisco PA-2FE-TX PA-2FE-TX= Hoja De Datos

Cisco Systems, Inc.

All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.

Page 2 of 4

• 100BaseTX (two pairs Category 5 unshielded twisted pair [UTP]) connectivity through an RJ-45 connector

• 100BaseFX (62.5/125-micron multimode fiber) connectivity through an SC connector

• ISL support for high-performance routing between multiple Ethernet VLANs

• IEEE 802.1d TB-VLAN support for transparently bridging VLANs

• Online insertion and removal (OIR) within Cisco 7200, 7300, 7400 Series routers, enabling users to remove, add,

or replace interface processors on line, increasing system availability; OIR for Cisco 7500 is made possible

through inserting or removing the VIP2 or VIP4

• Each port configurable for either full- or half-duplex operation

• LEDs to provide quick status checks and problem identification

• CiscoWorks network-management integration, including CiscoView applications, to provide device status and

monitoring, simple configuration, and minor troubleshooting

• Simple Network Management Protocol (SNMP) support through standard Management Information Bases

(MIBs), enabling visibility and management control on SNMP-supported network-management stations

• Single-port Fast Ethernet/ISL 100BaseTX port adapter (copper) with RJ-45 connectors (PA-FE-TX)

• Single-port Fast Ethernet/ISL 100BaseFX port adapter (fiber) with SC connectors (TX and RX) supporting

multimode 62.5/125-micron fiber cables (PA-FE-FX)

• Media Independent Interface (MII) connection on both 100BaseTX and 100BaseFX models (one connector active

at a given time)

• Maximum transmission unit (MTU) frame support (up to 1,500 bytes) for Token Ring ISL applications

• Dual-port Fast Ethernet/ISL 100BaseTX port adapter (copper) with RJ-45 connectors (PA-FE-TX)

• Dual-port Fast Ethernet/ISL 100BaseFX port adapter (fiber) with SC connectors (TX and RX) supporting

multimode 62.5/125-micron fiber cables (PA-FE-FX)

• PA-2FE-TX supports auto-negotiation between 10- and 100-Mbps

• CiscoWorks network management integration, including CiscoView applications, to provide device status

and monitoring, simple configuration, and minor troubleshooting