Cisco DNCS System Release 2.8.1 3.8.1 4.3.1 Guía Del Usuario

7.

Click Port to Hubs. The RF Output Port window opens. The Basic Parameters area of this window

shows the data that you entered for key RF output fields. The Associated Hubs area shows the hubs that
are available to receive content data from this QAM modulator. 

8.

Make sure the Selected Hubs field shows no hub names so that this QAM modulator sends BFS and

SI data (DNCS BFS QAM only) to all hubs in the headend.

Note: To remove a hub name from the Selected Hubs field, select the hub name, and then click
Remove. The hub name moves to the Available Hubs field.

9.

Click Save. The system saves this information into the DNCS database and closes the RF Output Port

window.

Important: Do not change information in the Advanced Parameters tab without first consulting Cisco
Services. Changing this data without direction from Cisco Services can degrade system performance.
You should not need to use the Advanced Parameters tab because the system automatically configures
these settings for you. These settings tell a modulator which version of software to use. 

10.

Because the system automatically sets up advanced parameters, you do not need to complete any

fields on the Advanced Parameters tab. Your next step is to select one of the following options:



 (for a DNCS BFS QAM

installation)

