Cisco DNCS System Release 2.8 3.8 4.3 Guía De Instalación
Chapter 1 Upgrading the QPSK Software
16
4031324 Rev B
Obtain the Software
Introduction
There are two ways to obtain the latest version of QPSK software. You can order the
software CD or you can download the software by connecting to an FTP server
maintained by Cisco Services. This section provides instructions for downloading
the software from our FTP Server.
software CD or you can download the software by connecting to an FTP server
maintained by Cisco Services. This section provides instructions for downloading
the software from our FTP Server.
Downloading the QPSK Software from an FTP Server onto the DNCS
Access to the FTP server requires current FTP server site access information. Because
many sites do not allow an open Internet connection to the DNCS for security
reasons, the following procedure provides generic instructions to access the FTP
server and download the software.
many sites do not allow an open Internet connection to the DNCS for security
reasons, the following procedure provides generic instructions to access the FTP
server and download the software.
This procedure also assumes the software is in a TAR file format. The TAR file is a
compressed image format that is the typical format of a software image released on
CD. If you have any questions about this process, contact Cisco Services.
compressed image format that is the typical format of a software image released on
CD. If you have any questions about this process, contact Cisco Services.
Accessing the FTP Server
Complete the following steps to access the FTP server.
1 Open an xterm window on the DNCS, if necessary.
2 Type su root and press Enter to log on as root user. The password prompt
1 Open an xterm window on the DNCS, if necessary.
2 Type su root and press Enter to log on as root user. The password prompt
appears.
3 Type the root password and press Enter.
4 Do you have a directory created for downloaded files?
4 Do you have a directory created for downloaded files?
If yes, go to step 5.
If no, follow this procedure to create a directory.
a Type mkdir /export/home/dncs/download/QPSK and press Enter.
b Type cd /export/home/dncs/download/QPSK and press Enter.
c Go to step 7.
a Type mkdir /export/home/dncs/download/QPSK and press Enter.
b Type cd /export/home/dncs/download/QPSK and press Enter.
c Go to step 7.
5 Clear the current contents of the download directory. First type pwd to confirm
you are in the correct directory; then, type rm -rfi *.
6 You will be prompted to delete each file in the directory. Press y to delete each
file.