Cisco DNCS System Release 2.7 3.7 4.2 Guía De Diseño

Descargar
Página de 182
 
 
Status Summary Diagnostic Screen 
78-4001708-01 Rev B 
15 
 
Field Name 
Description 
Possible Values 
RDC 
The information about the reverse 
data channel (RDC) 
 
Frequency—Dependent upon the 
setting to which RDC transmitter 
is broadcasting (MHz) 
 
Signal Level of Transmitter 
•  Acceptable Range
:  
+25 – +55 dBmV 
•  Recommended Range:  
+27 – +53 dBmV 
 
Round Trip Delay—delay 
between the DHCT and QPSK 
modem at the headend or hub 
(µsec) 
 
Clocks 
 
Field 
Name 
Description 
Possible Values 
Booted 
The date and time that the Explorer 
DHCT last booted 
Note: The hexadecimal format for 
the date and time is shown in 
parenthesis. 
 
[Date, Time]
 
Current 
The current date and time 
Note: The hexadecimal format for 
the date and time is shown in 
parenthesis. 
 
[Date, Time] 
 
 
                       
2
 A setting greater than +55 dBmV may indicate a problem. If the dBmV falls outside of the 
specified ranges, perform an analysis using a spectrum analyzer on the incoming signal.