Cisco DNCS System Release 2.8 3.8 4.3 Guía Del Usuario
Chapter 2 Post Logos
16
738163 Rev C
Example: /home/export/dncs/LOGOS/victorycable.rle
4 Click OK. The Select OS File window closes and the file you selected appears in
the Source File area of the Set Up DHCT OS window.
5 Click Save. The Set Up DHCT OS window closes.
6 To see if the new logo displays, perform one of the follow options, as
6 To see if the new logo displays, perform one of the follow options, as
appropriate:
a Reboot the set-top and either wait for the clock to appear on the LED or for
a Reboot the set-top and either wait for the clock to appear on the LED or for
the LED to stop blinking (Explorer 940 set-tops only).
b To see the MSO logo (RES files), display the IPG.
c To see the MSO Not IPG logo, access the recorded list or the HD wizard.
d To see the spin-down logo, wait for the DVR to go into power save mode.
c To see the MSO Not IPG logo, access the recorded list or the HD wizard.
d To see the spin-down logo, wait for the DVR to go into power save mode.
When this occurs, the spin-down logo appears in the screen saver.
e To see the new custom service logos, the SAM services must be updated to
point to the new logos. See the DNCS Online Help for instructions.
Note: If the new logo did not replace an existing logo, contact Cisco Services.
7 Repeat steps 1 through 6 to replace any other files, as needed.