Cisco Cisco 1 GHz GainMaker Amplifier Hoja De Datos
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 7
Features
●
High-performance Gallium Nitride (GaN) gain stage technology.
●
Plug-in accessories that are common to all Cisco 1218 MHz GainMaker amps and Cisco GS7000 products
(that is, attenuator pads, diplexers, and crowbar).
●
Amplifier housing that provides access to RF test points without opening the housing.
●
Spring-loaded seizure assemblies allow coaxial connectors to be installed or removed without removing
amplifier RF module.
●
Power supply mounted in housing lid for efficient thermal dissipation (60- and 90-VAC powering capability)
●
15A current capacity (steady state) and 25A surge survivability
●
Optional three-state reverse switch (on/off/-6 dB), which allows each reverse input to be isolated for noise
and ingress troubleshooting (status monitoring required)
●
Quadrature amplitude modulation (QAM) and analog pilot AGC available (optional)
●
AGC with thermal backup, which eliminates disruptive RF output variation in the event of pilot loss
●
Reverse input pad and RF test point for each reverse input port to allow optimum reverse path design and
alignment
●
Surge-resistant circuitry that helps ensure gain stage protection without fuses or other failure-causing
devices.
Figure 2. Block Diagram of Cisco 1218 MHz GainMaker High Gain Dual (HGD) System Amplifier