Cisco DNCS System Release 2.7 3.7 4.2 Guía De Instalación

Descargar
Página de 152
 
Chapter 2    Phase One - Perform Pre-Upgrade Checks 
 
 
 
36 
78-4003052-01 Rev G 
Install the Set-Top Resource File (Optional) 
For CVT downloads, you must install the set-top resource file (settop.xxx) that 
contains the device types installed in your network. The system refers to this data 
during the image file download assignment process to verify software compatibility 
with the selected device type. 
Note: The DNCS user interface for the CVT download was created before 
CableCARD modules existed. Therefore, the interface displays DHCT in several 
places where the more generic term devices would be more accurate. This is a 
cosmetic issue; all screens work as required for CableCARD modules. 
 
Loading the Set-Top Resource File 
Complete the following steps to load the set-top resource file (settop.res) into the 
DNCS database. 
1  On the DNCS Administrative Console, select the DNCS tab and then select the 
following tab based on the system release you have installed: 
 
For SR 2.2/3.2/4.0 and earlier, select the Element Provisioning tab. 
 
For SR 2.5/3.5/4.2 and later, select the Home Element Provisioning tab. 
2  Click Image. The Image List window opens. 
3  Click Advanced and select Load DHCT Resource File. The Load DHCT 
Resource File window opens. 
 
4  Click Browse. The Select Control File window opens. 
 
5  Highlight the current entry in the Filter field and press Backspace to delete it.