Cisco DNCS System Release 2.7 3.7 4.2 Guía De Instalación
Chapter 3 Phase Two - Test New Software
52
Error! No text of specified style in document.
Phase Two CVT Checklist
Use the checklist in this chapter to check off each task as you complete it. When you
finish this phase, save a copy of the checklist and all of the results from any tests that
you run in the event that the installation process fails during a later phase.
CAUTION:
You must complete each task in this checklist before you can proceed to the
You must complete each task in this checklist before you can proceed to the
next task. Otherwise, you risk a failed installation, which could disrupt
service to your subscribers.
Where necessary, the remaining sections of this chapter provide further detail to
help you complete each task in this checklist.
CVT Installation Checklist
1 Create or update test group(s) for each DHCT or CableCARD module type and
revision that will be upgraded using the CVT download process.
Note: A test group can contain multiple types of both DHCTs and CableCARD
Note: A test group can contain multiple types of both DHCTs and CableCARD
modules, therefore, you can have a single test group for all of your test devices.
2 Load the new image files onto the BFS.
3 Download the new software to the test groups.
4 Verify that the test devices operate as expected by checking the following:
3 Download the new software to the test groups.
4 Verify that the test devices operate as expected by checking the following:
DHCTs
Check Page 5 of the diagnostic screens on the test DHCT to verify that the
software version is correct.
Check Page 2 of the diagnostic screens to verify that all services are available.
Verify that the IPG contains 7 days of data.
Verify that all third-party applications are available and function as expected.
Verify that you can successfully purchase and view a PPV event on the test
DHCT.
CableCARD Modules
Verify that each host can display all authorized services.
5 You have completed Phase Two. Save a copy of both Phase Two checklists and
copies of the results from any tests that you completed during this phase. Go to
Phase Three - Install New Software (on page 63)