Cisco DNCS System Release 2.7 3.7 4.2 Guía De Instalación
Shut Down and Reboot the Servers
OL-31613-01
27
Shut Down and Reboot the Servers
Follow these instructions to reboot the servers:
1 If an RNCS EC exists on this system, type the following command and press
1 If an RNCS EC exists on this system, type the following command and press
Enter in the root remote terminal window on the existing EC to shut down the
EC server(s):
EC server(s):
siteCmd [lionn hostname] shutdown –y –g0 –i0
2
Type the following command and press Enter to shut down the target (current)
VM:
VM:
shutdown –y –g0 -i0
3 From vSphere, select the target (current) VMs you shut down, right-click, and
click Power > Power Off.
4 Does the system include the Replicated Database?
If yes, repeat steps 2 and 3 on the standby VM.
If no, continue with the next step.
5 From vSphere, click the new VM and click Console. Then, type the following
command and press Enter to reboot the new VM:
shutdown –y –g0 –i6
6 If you are installing on and migrating an RNCS VM, complete steps 2 through 5
on the RNCS EC.
Important: The remaining procedures in this chapter can be performed in the VM
Console tab in vSphere/vCenter or from a root and/or dncs remote terminal
window on the new VM.
Console tab in vSphere/vCenter or from a root and/or dncs remote terminal
window on the new VM.