Cisco DNCS System Release 2.7 3.7 4.2 Guía De Instalación

Descargar
Página de 124
 
Appendix C 
Configuring DTACS on an SR 7.0 System 
84 
OL-31613-01 
Open a Remote Terminal Window on the EC and 
DTACS Servers 
To configure the DTACS server to run on an SR 7.0 system, you will need to add or 
modify specific configurations and files on both the DTACS server and the EC. For 
this reason, we recommend opening two root remote terminal windows: one that 
accesses the EC server and one that accesses the DTACS server. 
Important: Once this procedure is completed, we will refer to either the root remote 
terminal window on the DTACS or the EC server for the remaining procedures in 
this appendix. 
Complete the following steps to open two root remote terminal windows on each 
server: 
1  Open two remote terminal windows on the EC system. 
2  In one remote terminal window, complete the following steps to log in as root 
user on the EC: 
a  Type 
su –
 and press Enter. You are prompted to enter your password. 
b  Type the root password and press Enter. The root prompt appears. 
3  In the other remote terminal window, access your DTACS server by entering the 
following command and pressing Enter
ssh –X [userID]@[dtacsIP]
 
Notes: 
 
Substitute your user ID that was created on your DTACS server for [userID]. 
 
Substitute the IP address for the DTACS server for [dtacsIP]. 
 
Do not include any brackets in the command. 
4  In the DTACS window, type 
su –
 and press Enter to change to root user. 
5  Enter the password when prompted.