Cisco Cisco RF Gateway 1
QAM Annex and Frequency Plan Configuration
78-4025112-01 Rev H0
27
3 In the Frequency Plan field, select the desired frequency plan. The standard plan
has channels mapped to pre-set frequencies used in North America. The custom
plan lets you choose frequencies. ITU-A and ITU-C have custom plans only.
plan lets you choose frequencies. ITU-A and ITU-C have custom plans only.
4 Click Apply.
5 Click Save.
6 Reboot the device. Reboot/power-cycle is required after changes to the annex
5 Click Save.
6 Reboot the device. Reboot/power-cycle is required after changes to the annex
setting.