Cisco Cisco StadiumVision Mobile Guía De Instalación
© 2011 Cisco Systems, Inc. All rights reserved.
Page 7 of 37
StadiumVision Director Installation
This section provides instructions for installing SV Director on the Cisco UCS C200
M2 High-Density Rack-Mount Server (StadiumVision Server) and the Cisco
Application Deployment Engine (CADE) 2140 Series appliance. Use these
instructions if SV Director has never been installed on the SV Director server. If SV
Director is already installed on the server and you want to upgrade to Release 2.3,
see the section
M2 High-Density Rack-Mount Server (StadiumVision Server) and the Cisco
Application Deployment Engine (CADE) 2140 Series appliance. Use these
instructions if SV Director has never been installed on the SV Director server. If SV
Director is already installed on the server and you want to upgrade to Release 2.3,
see the section
The install program will:
Automatically set up and initialize the hardware RAID controller 1.
Wipe any existing partitions and zero out the Master Boot Record (MBR).
Install the Cisco StadiumVision software.
The Hardware RAID1 configuration happens automatically at installation as
does partitioning. This is completely transparent to the user during the
installation process.
does partitioning. This is completely transparent to the user during the
installation process.
Creating an Installation DVD
The SV Director server ships with an installation DVD which will perform a non-
interactive install/upgrade of SV Director; therefore, you do not need to create a
DVD in the normal deployment scenario. If you are a Cisco StadiumVision customer
facing engineer (CFE) and need to create an installation DVD, use this procedure.
interactive install/upgrade of SV Director; therefore, you do not need to create a
DVD in the normal deployment scenario. If you are a Cisco StadiumVision customer
facing engineer (CFE) and need to create an installation DVD, use this procedure.
1. Download the appropriate ISO image and md5 checksum file for the SV Director
server from the following location:
For the Cisco StadiumVision Server (UCS C200), download the following 64
bit iso files where nn is the latest build number:
For the Cisco ADE 2140 StadiumVision Director server, download the
following 32 bit iso files where nn is the latest build number:
2. Burn the ISO to a DVD.
3. Distribute the DVD to the customer/partner.