Cisco Cisco StadiumVision Director Manual De Mantenimiento
Managing Zones, Groups and Locations
© 2011-2013 Cisco Systems, Inc. All rights reserved.
22 of 30
Removing Groups and Zones
1. Select the group or zone you want to remove. You can remove multiple groups and zones at one
time. Use the CTRL-click and SHIFT-click keyboard functions to select the multiple groups and
zones.
zones.
2. Click Remove from Zones or Remove Zones.
3. In the confirmation dialog box, click Yes to remove the groups from the zones.
Assigning Groups to Emergency, Delay, and Non-Event Zones
You’ll notice there are three default zones in the Zones sources list: emergency_zone, delay_zone,
and nonevent_zone. You need to assign a group to each of these zones. These zones cannot be
renamed. If you want to assign all DMPs to one of these zones, you can create a new group, add all
DMPs to that group, and then add that group to the zone.
and nonevent_zone. You need to assign a group to each of these zones. These zones cannot be
renamed. If you want to assign all DMPs to one of these zones, you can create a new group, add all
DMPs to that group, and then add that group to the zone.
Note: Any DMPs which do not have an action in the emergency/delay state will have proof of play
disrupted in the emergency/delay state.
disrupted in the emergency/delay state.
emergency_zone: All TVs assigned to this zone will display the configured Emergency message
when the Emergency ad hoc state is invoked by the event operator.
when the Emergency ad hoc state is invoked by the event operator.