Cisco Cisco StadiumVision Mobile Manual De Mantenimiento

Table 17. Global SV-4K Settings—PTP Properties

Property

(Registry Key)

Description

Values

PTP domain

(Globaldmpsetting.sv4k.init.ptp.

domain)

Domain number
for the SV-4K PTP
network, which
defines the
multicast address
for PTP
communication.

The value must be
a valid domain
number per IEEE
1588-2008 and
correspond to your
network
PTP configuration.

For IEEE-1588 PTP, possible values
are:

0—(Default) 224.0.1.129

1—224.0.1.130

2—224.0.1.131

3—224.0.1.132

PTP is disabled when the property is
unset (blank).

PTP master candidates

(Globaldmpsetting.sv4k.init.ptp.

master.host)

Note: In a multi-

venue scenario, or
multi-VLAN scenario,
where PTP multicast
traffic does not cross
venues, designate
PTP master(s) in
each venue or VLAN,
or use the default "*"
configuration.

Eligible SV-4K
devices for master
candidate
selection.

Possible values are:

*—(Default). Wildcard pattern
that specifies all SV-4K devices
in the network as eligible PTP
master candidates.

Semicolon-separated IPv4
addresses of SV-4K devices for
each subnet.

blank—Specifies that a
PTP master source external to
Cisco StadiumVision Director is
used. This configuration is only
valid for a venue without SV-4K
devices in multiple subnets.

Verifying PTP Operation for the SV-4K Media Player

This section describes how to verify the PTP configuration and also the operation of
PTP for your SV-4K devices.

To verify the PTP operation for the SV-4K media player, complete the following
steps:

1. Open your browser and navigate to one of the DMPs:

http://sv4k-ip-address/ptp.html

39 of 68