Cisco Cisco StadiumVision Mobile Reporter Notas de publicación
20
Release Notes for Cisco Vision Dynamic Signage Director (Cisco StadiumVision Director) Release 5.0
New and Changed Information in Cisco Vision Dynamic Signage Director Release 5.0
Multicast Video Scaling for SV-4K and DMP-2K Media Players
Note:
Multicast video scaling is supported on the SV-4K and DMP-2K only.
WHAT IS IT
Cisco Vision Dynamic Signage Director Release 5.0 introduces support for scaling a multicast video region across a video
wall display for both portrait and landscape orientation.
wall display for both portrait and landscape orientation.
Scaling refers to support of two things:
1.
Stretching of the content.
2.
Showing only a portion of the content per display in a multi-screen video wall.
WHY USE IT
Multicast video scaling is intended for use in video walls.
Multicast Video Tune-In Timeout Default Value Change
Note:
Configuration of Multicast Video Tune-In Timeout is supported on the SV-4K and DMP-2K only.
WHAT IS IT
A change to the Video tune-in timeout default value from 500 ms to 10000 ms (10 seconds) for SV-4K and DMP-2K
media players. The default change is made in new Cisco Vision Dynamic Signage Director Release 5.0 installations only.
The value is used for receiving multicast video information on the network and for DCM failure detection.
media players. The default change is made in new Cisco Vision Dynamic Signage Director Release 5.0 installations only.
The value is used for receiving multicast video information on the network and for DCM failure detection.
WHY USE IT
Certain venues might encounter network conditions requiring tuning of this multicast video operation.
WHERE TO CONFIGURE IT
Go to: Management Dashboard > Dynamic Signage Director Configuration > System Configuration > Global DMP
Settings > SV-DMP Common Settings.
Settings > SV-DMP Common Settings.
Note:
After you change and refresh the property value, you must reboot the DMP(s).